Zhongdi ZD-20U Kebul na Siyar da Ƙarfin ƙarfe 5V 8W Musamman dacewa don ƙawata akan samfuran bugu na 3D

Siffofin:

•Ƙananan kuma ƙarami don ɗaukar nauyi.
• Saurin zafi da farfadowa nan take.
• Tushen rayuwa mai tsawo tare da hular kariya.
• Sake taɓa maɓallin ƙarfe don sake fara aiki.
•2 in 1 hadedde hita & tip mai siyar.
•Dan taɓa maɓallin ƙarfe a jikin alkalami na saida kuma za'a iya fara aikin tare da hasken LED.
• Za a kashe hasken LED kuma alƙalami zai shiga yanayin barci ta atomatik lokacin da ya yi aiki na daƙiƙa 25.

Ƙayyadaddun bayanai

• Shigarwa: USB 5V
•Ikon: 8W
•Mafi girman zafin jiki: 380°C-420°C
•Lokacin dumama: <15 seconds Lokacin sanyaya: <30 seconds Kashe atomatik: 25 daƙiƙa 25 mai nunin LED mara aiki: Ee

Aiki:

Zabin 1: Haɗa igiyar USB zuwa kwamfutar tafi-da-gidanka:

•1.Lokacin da kuka taɓa "canjin taɓawa" akan alkalami, alamar LED mai ja zata haskaka.Zai yi zafi kuma bayan 15 seconds, yana shirye don aikin siyarwa.
•2.Lokacin da kuka saki “canjin taɓawa”, alkalami zai shiga yanayin bacci bayan alamar LED ja ta fita,
•3.Lokacin da kuka sake taɓa “canjin taɓawa”, alamar jajayen LED
•zai sake haskakawa.Za a sake farawa.
•4.Lokacin da “maɓallin taɓawa” ba zai iya kunna alkalami ba, alamar LED ja kuma za ta haskaka idan kun ɗan girgiza shi.Sa'an nan kuma zai yi zafi kuma ya kasance a shirye don aikin soldering kuma.

Zabin 2: Haɗa igiyar USB zuwa bankin wutar lantarki:

•1.Lokacin da aka haɗa ta wannan hanya, "maɓallin taɓawa" ba zai yi aiki ba.
A maimakon haka, “vibration switch” a cikin alkalami zai fara aiki.
•2.Bayan haɗawa, alamar LED ja za ta haskaka.Da fatan za a riƙe alƙalami kuma jira kusan daƙiƙa 15, alƙalamin zai yi zafi kuma ya shirya don aikin siyarwa.
• 3. Hasken LED zai kashe kuma alkalami zai shiga yanayin barci
• kai tsaye lokacin da ya yi aiki na daƙiƙa 25.
•4.Lokacin da kuka ɗauki alƙalami, alkalami zai sake fara aiki.