Zhongdi ZD-8906N 25W/30W Solder 550 ℃ Superiro Dumama Performance LCD Nunin Zazzabi Nuni Soldering Iron

Siffofin:

•Mai zafi: yumbu, 160°C – 480°C (25W), 160°C – 520°C (30W)
• Latsa maɓallin sama/ƙasa don saitin zafin jiki tare da nunin LCD.
•Mafi kyawun aikin dumama tare da ci-gaban dumama yumbu, mafi kyau fiye da dumama na gargajiya.
• Yayi zafi da sauri kuma kula da wurin da aka saita daidai.
•Ya haɗa da ƙarfe mai siyar da riƙon roba, soso da aljihunan aljihun tebur.
• Tare da tukwici da aka riga an saka.

Ƙayyadaddun bayanai

Aiki

•Buɗe tashar saida kaya sannan a duba duk sassa.Kada a sanya sassan da suka lalace cikin aiki.
• Shigar da tsayawar ƙarfe kuma a jika soso mai tsaftacewa da ruwa.
• Saka iron ɗin a cikin tashoshi.
• Sanya tashar saida ta akan busasshiyar wuri
•Toshe tashar saida kuma kunna shi (I=ON/0=KASHE).Allon LCD zai nuna saitin zafin jiki na 300 ℃.
• Sannan danna maɓallin "+" ko "-" don daidaita yanayin zafi.Kowane latsa zai zama +/- 10 ℃.Iron ɗin zai kai ga yanayin da aka saita a cikin mintuna 10.
• Gwada zafin jiki ta hanyar taɓa titin ƙarfe tare da solder.Idan mai siyarwar ya narke cikin sauƙi, zaku iya fara siyarwar.
• A dasa tip ɗin ƙarfe mai zafi tare da solder;goge solder wuce kima tare da rigar tsabtace soso.
•Zama wurin saida kayan da baƙin ƙarfe sannan a ƙara solder.
• Jira har sai mai siyar ya huce.
• Tsaftace tip tare da rigar soso bayan kowace siyarwa.
•Bayan an gama aikin sai a mayar da iron ɗin a cikin mashin don ya huce sannan a kashe tasha.
• Don manyan nasihu masu siyarwa, kunna saitunan zafin jiki mafi girma don mafi kyawun aikin siyarwar.
• Rage yawan zafin jiki yayin hutu, wanda ke adana kuzari kuma yana tsawaita rayuwar tip ɗin siyarwa.
•Kada a kashe tip ɗin saida, ko zai lalace.
•Koyaushe sanya iron ɗin a wurin tsayawa lokacin da yake dumama ko lokacin hutu.
• Yi amfani da solder don kayan lantarki kawai.Acid solder iya lalata tip ko workpiece.