Zhongdi ZD-8917 2 in 1 Soldering and Desoldering Station 90W, Max 350W

1. Bayani

ZD-8917 Soldering & Desoldering Station wani babban aiki ne da tashar ayyuka da yawa wanda aka haɓaka da kera don bincike na samfuran lantarki, samarwa da sake yin aiki.Ana amfani da wannan kayan aiki a fannonin bincike, koyarwa da samarwa na lantarki, musamman wajen gyarawa da sake yin aiki akan na'urorin lantarki da na'urorin sadarwa.
1.1 Sashen Kulawa
Ana sarrafa ƙarfen ƙarfe da kayan aikin lalata da ƙananan na'urori guda biyu ta atomatik.Na'urar sarrafa dijital ta dijital da ingantaccen firikwensin firikwensin da tsarin musayar zafi suna ba da garantin daidaitaccen sarrafa zafin jiki a titin saida.Mafi girman matakin madaidaicin zafin jiki da mafi kyawun yanayin zafi mai ƙarfi a ƙarƙashin yanayin kaya ana samun su ta hanyar sauri da daidaiton rikodin ma'aunin ƙididdiga a cikin da'irar sarrafawa mai rufaffiyar, kuma wannan ƙira ta musamman ce don fasahar samarwa mara gubar.
Yanayin zafin jiki shine 160-480 ℃.
1.2Sayar da Iron(ZD-418)
ZD-418 soldering baƙin ƙarfe da ikon 60W (Heat up rating 130W) da spare soldering tips (N9 jerin) za a iya amfani da ko'ina a cikin lantarki filin.
Babban iko da ƙirar siriri ya sa wannan ƙarfe ya dace da kyakkyawan aikin siyarwa.Abubuwan dumama an yi su ne da PTC kuma firikwensin da ke kan tip ɗin siyarwa na iya sarrafa zafin siyarwar da sauri da daidai.
1.3 bindiga mai lalata (ZD-553)
ZD-553 Desoldering gun tare da ikon 90W (Heat up rating 200W) da kuma kayayyakin lalata (N5 jerin) za a iya amfani da ko'ina a cikin lantarki filin.
Babban iko da ƙirar nau'in bindiga ya sa wannan bindigar ta dace da aikin lalata da kyau.Na'urar dumama an yi ta ne da PTC kuma firikwensin da ke cikin ɓangarorin ɓarkewar na iya sarrafa yanayin lalata da sauri da daidai.

2. Ƙayyadaddun bayanai

Wutar lantarki: AC100-240V 50/60Hz
Wutar lantarki: 140W
Ƙasa kayan gyara sun haɗa

Kayan sayar da iron&desoldering gun

3. Aiki

3.1 Sanya baƙin ƙarfe da keɓaɓɓiyar bindiga a cikin mariƙin daban.Sa'an nan kuma haɗa filogin zuwa ma'ajin da ke kan tashar kuma juya agogon hannu don ƙara matsawa filogin goro.Tabbatar cewa samar da wutar lantarki ya dace da ƙayyadaddun ƙayyadaddun akan nau'in farantin karfe kuma maɓallin wuta yana kan matsayin "KASHE".Haɗa na'urar sarrafawa zuwa wutar lantarki kuma kunna wuta.Sa'an nan za a yi gwajin kai wanda aka kunna duk abubuwan nuni a takaice.Sa'an nan tsarin lantarki yana kunna ta atomatik zuwa yanayin da aka saita kuma yana nuna wannan ƙimar.
3.2 Saitin nuni da zafin jiki

① Yana nuna ainihin zafin tip.
② Yana nuna zafin saitin.Danna maɓallin "UP" ko "KASA" don saita zafin jiki.
③ ℃/℉ nuni.Danna maɓallin "℃/℉" don canza nuni tsakanin ℃ da ℉.
④ Lokacin da ainihin zafin tip ya yi ƙasa da saitin, "HEAT ON" zai nuna.
⑤ Lokacin da bambanci ya fi ± 10 ℃ tsakanin ainihin da saita yanayin zafi na tip, "JIRA" zai nuna.Jira har sai ya bace.
⑥ Lokacin da "KUSKURE" ya nuna, ana iya samun wasu matsala tare da tsarin.Ko kuma bindigar siyar da ƙarfe/ba a haɗa daidai ba.

4. Tsaftace bututun lalata

Bayan amfani, an bar sharar solder a cikin bututu.Tsaftace shi akai-akai, in ba haka ba, sharar gida za ta toshe bindigar da aka lalata.A yanayin zafi mai yawa, sharar solder zai oxidize (wanda ba shi da gubar narke a 220 ℃ kuma mai siyar da gubar yana narkewa a 180 ℃), kumbura kuma ya manne wa bututu tam.A ƙarshe zai zama kusan ba zai yiwu a cire shi ba ko da tare da kayan aikin tsaftacewa kamar ƙasa.

(Kayan aikin tsaftacewa)
Yadda ake tsaftacewa:
Bayan amfani da shi kowane lokaci, kunna bindigar da aka lalata sau 3-5 a cikin iska da sauri don share sharar da ke cikin bututunsa.
Idan tazara tsakanin kowane aiki ya fi minti 20, yi amfani da kayan aikin tsaftacewa don tsaftace bututu yayin lokacin tazara.
Lokacin da aikin lalata ya zama mara kyau, yi amfani da kayan aikin tsaftacewa don tsaftace bututu nan da nan.
Lokacin da rabin gilashin bututu ya cika da sharar solder, tsaftace shi nan da nan.
Lokacin da tacewa yana toshewa, maye gurbin tacewa nan da nan.

5. Yanayin barci

Tare da 4-pin soldering iron & 6-pin desoldering gun, ba shi da yanayin barci;
Tare da 6-pin soldering iron & 7-pin desoldering gun, yana da yanayin bacci.
Tashar za ta shiga yanayin barci idan ba a yi amfani da shi na mintuna 15 ba.Zazzabi na tip zai yi sanyi zuwa 200 ℃ kuma ya kiyaye shi yayin lokacin barci har sai an sake kunna tashar.Kuma tashar za ta koma saitunan da suka gabata bayan an sake farawa.Kuna iya amfani da kowane ɗayan hanyoyin da ke ƙasa don sake kunna shi:
● Kashe shi sannan a kunna.
● Danna kowane maɓalli (Idan baku ɗauki iron ɗin ba a cikin mintuna biyu bayan danna maɓallin, tashar zata sake komawa yanayin bacci).
● Dauki bindigu na siyar da ƙarfe.