Zhongdi ZD-8950 Mini DC Power Soldering Fensir 10W 20W 30W 12V/18V/24V Input Voltage

Siffofin

• Nunin zafin jiki da maɓallin sarrafa zafin jiki da aka gina a hannun.

•Allon yana sa a sarari da sauƙin karanta zafin jiki.

• High quality dumama kashi kawo sau biyu aiki yadda ya dace, tsawon rayuwa da sauri dumama up gudun.

• Ma'aunin wutar lantarki na DC ya dace da adaftar 12-24V (Max).

•Lokacin da daidaita zafin jiki ta maɓallin ''++,''-", nuni zai nuna yanayin zafin da aka saita.

•Lokacin da aka saki maɓallin, nuni zai nuna ainihin zafin jiki a cikin daƙiƙa da yawa.

•Waya mai siyarwa (5g), filogi mai juyawa da madaidaicin ƙarfe mai siyar da ƙwallon tsaftacewa an haɗa.

Ƙayyadaddun bayanai

• Nuni: LCD

• Wutar lantarki na shigarwa: DC 12-24V(Max)

• Zazzabi: 150 ℃～450 ℃

• DC Toshe: 3.5*1.35mm

• Girman: 170mm*15mm*17mm

Iko: 10W-30W (Max)

• Lokacin zafi zuwa 300 ℃: aƙalla 30s

• Juriya na tip zuwa ƙasa: <２Ω

Nasihu masu kyauta

Tsaro

•Ya kamata a yi amfani da baƙin ƙarfe tare da ingantattun adaftan.

•Kada a yi amfani da shi a cikin danshi ko jika.

•Kada a yi amfani da kusa ko kusa da abubuwa masu fashewa ko masu ƙonewa.

• Tsaftace samfurin kuma gwada.

Kashe wutar lantarki yayin ɗaukar hutu ko kammala amfani.

•Idan wuta ta kunna, ƙarfen zai kai 150℃～450℃.Yi hankali da yawan zafin jiki.

•Kada a taɓa sassan ƙarfe kusa da titin saida.

•Kada a nutsar da samfurin cikin ruwa ko amfani da rigar hannu don hana yaɗuwa.

•A guji faɗuwa, saboda tashar sarrafa ƙarfe an yi ta ne da ingantattun abubuwa.

• Bayan 40min ta ci gaba da amfani a kan 350 ℃, da baƙin ƙarfe rike zai kai 50 ℃ ~ 60 ℃.

•A karon farko amfani da ƙarfe na iya haifar da hayaki, wannan man shafawa ne kawai da ake amfani da shi wajen kera wuta.Yana da al'ada kuma yakamata ya wuce kusan kusan.Minti 10.Ba shi da lahani ga samfur ko mai amfani.

Zaɓin Samar da Wuta

Kafin kunna wuta, da fatan za a duba idan adaftan ya hadu a ƙasa misali.Ana ba da shawarar yin amfani da adaftar wutar lantarki ZD-8950 (24V, 1.5A).

Aiki

①Tsoffin Saituna:

② Nunin allo: 1. Saitin yanayin zafi Lokacin da aka haɗa shi da wutar DC, allon yana nuna lambar sigar farko sannan kuma ainihin zafin jiki.Za a iya saita zafin jiki bayan danna maɓallin "+"/-" sau biyu.2. Saitin jiran aiki Lokacin da aka haɗa da wutar DC, danna maɓallin "+" da "-" a lokaci guda don shiga wasu saitunan.Hakanan, allon yana nuna JIRA 180 (lokacin jiran aiki da ake buƙata), JIRA TEMP 200 ℃ (tsawon jiran aiki), SLEEP 360 (lokacin bacci da ake buƙata) da ℃/℉ tare da sakan 2 kowanne.Mai amfani zai iya saita lokaci da lokaci ko zaɓi nuni a ℃/℉ ta latsa "+" ko "-" lokacin da allon ya nuna yanayin da ya dace.Idan yanayin jiran aiki da aka saita ya fi na saiti na aiki, yanayin jiran aiki baya aiki.3. Default saitin Idan baƙin ƙarfe ya kasance a tsaye, zai shiga cikin yanayin jiran aiki bayan 180 seconds (default saitin) kuma zafin jiki zai ƙi zuwa tsoho zafin jiki na 200 ℃.Danna kowane maballin ko matsar da abu, zai shiga yanayin aiki kuma zafin jiki zai tashi zuwa yanayin da aka saita na 300 ℃ (tsararriyar saitin) .A yanayin jiran aiki, zai shiga yanayin barci bayan an saita lokacin saiti na 360 (default settings). ).Yanayin barci zai zama zafin jiki.Danna kowane maɓalli don sake farawa aiki.4. Yanayin zafin jiki Iron yana da aikin daidaita yanayin zafi.Idan ainihin zafin jiki ya bambanta da nuninsa, mai amfani zai iya yin gyare-gyare da kansu.Da farko danna ka riƙe maɓallin "+", sannan ka kunna shi don shigar da yanayin daidaitawa.Idan ainihin zafin zafi ya yi ƙasa da nuni, danna maɓallin "-" don rage nuni.Idan ainihin zafin zafi ya fi nuni, danna maɓallin "+" don ƙara nuni.Yanayin daidaitawa zai fita ta atomatik bayan an yi daidaitawa.

Kulawa

1. Koyaushe kiyaye tip ɗin a cikin tin kafin a kashe ko adanawa na kowane lokaci.Shafa kawai kafin amfani.2. Kada a ajiye baƙin ƙarfe na dogon lokaci saboda wannan zai rushe saman saman tip.3. Kada a danna ƙarfe da ƙarfi yayin amfani don guje wa lalata tip.4. Kada a taɓa tsaftace tip da m, abrasive kayan kamar fayiloli.5. Kada a yi amfani da ruwa mai ɗauke da acid ko chloride.Yi amfani da rosin kawai ko kunna juzu'in guduro.6. Tin tip kafin amfani da farko don tabbatar da tsawon rayuwar sabis.