Zhongdi ZD-99 Zazzabi Daidaitacce Solder Karamin Karamin Karamin 48W 58W 150-520 ℃, Nasihu masu Ingancin Mica Heater

Zhongdi ZD-99 Zazzabi Daidaitaccen Solder Ƙaramin Ƙarfin 48W 58W 150-520 ℃, Mica Heater High Quality Tips Featured Hoto

Takaitaccen Bayani:

Samfura: ZD-99

•Mafi dacewa ga masu sha'awar sha'awa tare da ayyuka na asali.
Kunnawa/kashewa tare da alamar wuta.
• Ƙarfe mai inganci da haske mai siffar fensir.
• Rikon kumfa mai ɗorewa tare da kayan dumama mai maye gurbinsa.
•Ya haɗa da tip ɗin ƙarfe mai inganci, mariƙin ƙarfe, da soso don tsaftace tip.
• Mai zafi: mica, 150°C - 480°C (48W), 150°C -520°C(58W)
• Kula da zafin jiki tare da ƙwanƙwasa

Sayi daga Zhongdi da amincewa

Ma'aikata na kwarai, ƙwarewar masana'antu na shekaru 30;

Daya daga cikin manyan masu samar da tashar saida, siyar da karfe da kayayyakin da suka danganci saida a kasar Sin;

Babban inganci, 0.01% gunaguni;

Bayarwa ga ƙasashe sama da 100, ƙwarewar fitarwa mai wadata.

Aika mana imel

Cikakken Bayani

Tags samfurin

Siffofin:

Ƙayyadaddun bayanai

Lambar	Wutar lantarki	Ƙarfi	Bakin ƙarfe	Wutar lantarki	Tips
89-9231	110-130V	48W	88-203A	78-203A	C1 high quality
89-9232	220-240V	48W	88-203B	78-203B	C1 high quality
89-9233	110-130V	58W	88-203C	78-203C	C2 high quality
89-9234	220-240V	58W	88-203D	78-203D	C2 high quality

Aiki

•Buɗe tashar saida kaya sannan a duba duk sassa.Kada a sanya sassan da suka lalace cikin aiki.
•Asaka riƙon riƙon ƙarfe na gefe a cikin tashar siyarwar, jika soso mai tsaftacewa a cikin mazubin soso da ruwa.
• Saka iron ɗin a cikin ɗigon riƙo
• Sanya tashar saida ta akan busasshiyar wuri.
•Haɗa filogi na mains zuwa soket kuma kunna tashar sayar da wutar lantarki ta hanyar amfani da wutar lantarki (I=ON/0=KASHE) Idan kun kunna wutan yana kunna wuta.
•Koyaushe sanya iron ɗin akan ɗigon riƙon lokacin da yake dumama ko lokacin hutu daga siyarwar
• Tabbatar cewa benci na aikin saida ya tsafta
• Yi amfani da solder don kayan lantarki kawai.Solder acid na iya lalata tip ɗin saida ko yanki na aikin
• Tsara yawan zafin da ake so na ƙarfe na siyar da madaidaicin ƙulli.
• Wuraren masu launi suna daidai da yanayin zafi masu zuwa:
•Yellow≥160℃
• Lemun tsami 180 ℃ zuwa 350 ℃
• Zurfafa Orange 350 ℃ zuwa 450 ℃
•Ja ≥550℃
• Rage yawan zafin jiki yayin hutu, wannan yana adana kuzari kuma yana ƙara tsayin tip ɗin siyarwa.
• Jira kamar minti 10 har sai tip ɗin saida ya kai yanayin zafin saiti, gwada zafin jiki ta hanyar taɓa titin saida da solder.Idan mai siyarwar ya narke cikin sauƙi, zaku iya fara siyarwar.
• Gwada tip ɗin siyar da zafi tare da solder;goge wuce kima solder a kan rigar tsaftacewa soso.
•Yana dumama sashin da za'a siyar tare da titin saida kuma ƙara solder.
• Jira mai zafi ya huce.
• Tsaftace titin saida akan jikakken soso bayan kowace saida
•Bayan an gama siyarwar, sai a mayar da iron ɗin da ke cikin rakiyar, sannan a kashe tasha ɗin a babban mashigin.
•Kada a kashe tip ɗin saida, ko zai lalace.
•Kada a taɓa tip ɗin siyarwa mai zafi.
• Bari baƙin ƙarfe ya huce bayan amfani.
•Kada a dunkule baƙin ƙarfe a cikin ruwa
• A lokacin hutu, dole ne a sanya iron ɗin a cikin rumbun riƙon.