Zhongdi Sabon Zuwan Zazzabi Mai Sarrafa Tashar Siyar da Tashar 3 cikin 1 Haɗuwa, Haɗin Iron, Fume Extractor da Hasken LED 60W, Dumama 130W
Siffofin:
• Zazzabi mai sarrafa soldering tashar tare da sauri dumama da dijital nuni + fume extractor + LED lighting
Ƙayyadaddun ƙayyadaddun ƙarfe mai sarrafa zafin jiki
Zazzabi: 160-480 ℃ (320-896F°)
• TC saurin dumama
•Tare da aikin juyawa °C/F.
Za'a iya daidaita zafin jiki cikin sauƙi tare da ƙulli.
• Nuni tare da canza hasken baya.
•Tare da aikin dumama cikin sauri, yana ɗaukar ƙasa da minti 1 don tashi daga zafin ɗakin zuwa 400°C(752°F).
Ƙayyadaddun mai fitar da hayaki
• Gudun iska: 1m³/min(max)
•Ikon: 23W
Ƙayyadaddun fitilun LED
• 12 LEDs tare da ikon 5W
| Lambar | Wutar lantarki | Bakin ƙarfe | Wutar lantarki | Ƙarfi | Lura | Wutar lantarki | Tukwici |
| 89-5101 | 110-130V | ZD-415T | 24V | 60W (ƙimar zafi 130W) | 4 fil | 78-415T (tare da binciken zafin jiki) | N9 mai inganci |
| 89-5102 | 220-240V |
An haɗa 1 yanki na matatar carbon da aka kunna (girman 120*120*10mm).
Nuni na Dijital:
① Ainihin zafin jiki na ƙarfe
② Saita zafin ƙarfe na siyar
③ ℃/℉
④ ZAFI
⑤ JIRA
⑥ KUSKURE
Aiki:
Sanarwa: The soldering iron, fume extractor da LED Lighting za a iya amfani da daban ko tare.
1. Cire tashar daga cikin kunshin kuma jefar da kayan marufi (misali jakunkuna na filastik) ko adana ta yadda yara ba za su isa ba.Akwai hadarin shakewa!
2. Sanya shi a kan matakin, m surface kuma toshe shi a ciki.
3. Kunna wutar lantarki a bayan tashar.
● Sayar da ƙarfe
1. Short danna maɓallin zafin jiki kuma nunin LCD zai haskaka.Juya ƙwanƙwaran agogon agogo don ƙara yawan zafin jiki da gaba da agogo don rage shi.Lokacin da ainihin zafinsa ya kai saitin, nunin LCD zai juya daga rawaya zuwa fari.Don kashe ƙarfe, dogon danna maɓallin zafin jiki na 3 seconds.
2. Lokacin da aka kunna ƙarfe, ɗan gajeren danna maɓallin zafin jiki don canzawa tsakanin ℃ da ℉.
3. Lokacin da ainihin zafin ƙarfe na ƙarfe ya yi ƙasa da saitin, "HEAT ON" zai nuna.
4. Lokacin da bambanci ya fi ± 10 ℃ tsakanin ainihin yanayin zafi na baƙin ƙarfe, "JIRA" zai nuna.Jira har sai ya bace.
5. Lokacin da "KUSKURE" ya nuna, za'a iya samun matsala tare da tsarin.Ko kuma ba a haɗa baƙin ƙarfe daidai ba.
6. Yana da aikin ƙwaƙwalwar ajiya na zafin jiki.Lokacin da kuka kunna ƙarfe na gaba, saitin zafinsa zai kasance a lokacin da kuka saita a ƙarshe.
● Mai fitar da hayaki
1. Latsa ka riƙe maɓallin a gefen tashar kuma daidaita kusurwar mai fitar da hayaki.Sannan saki maɓallin don kulle shi.
2. Kunna shi tare da maɓallin sa akan panel.
● Hasken LED
1. Kunna LED tare da kunna ta a kan panel.
2. Idan hasken LED yana da ban mamaki, zamewa ƙasa da inuwa.
| Kunshin | Qty/Carton | Girman Karton | NW | GW |
| Akwatin kyauta | 4pcs | 39*25.5*28cm | 8 kgs | 9 kgs |
